科技行者

行者学院 转型私董会 科技行者专题报道 网红大战科技行者

知识库

知识库 安全导航

至顶网网络频道pix中的七个命令

pix中的七个命令

  • 扫一扫
    分享文章到微信

  • 扫一扫
    关注官方公众号
    至顶头条

本文介绍cisco pix中的七个命令。联合使用static和conduit命令来只允许http访问。

作者:51CTO.COM 2007年10月31日

关键字: 思科 命令 PIX

  • 评论
  • 分享微博
  • 分享邮件

六个基本命令

static:Configure a persistent one-to-one address 
translation rule by mapping a local IP address to 
a global IP address. This is also known as Static Port 
Address Translation (Static PAT). (Configuration mode.)
static [(prenat_interface, postnat_interface)] 
{mapped_address| interface} real_address [dns] [netmask mask] [norandomseq] 
[connection_limit [em_limit]]
show static
nameif,Name interfaces and assign security level. (Configuration mode.)
nameif hardware_id if_name security_level
show nameif /clear nameif
interface:Identify network interface speed and duplex. (Configuration mode.)
interface hardware_id [hardware_speed] [shutdown]
show interface hardware_id [hardware_speed] [shutdown]
ip address:Identifies addresses for network interfaces, 
and enables you to set the number of times the PIX Firewall will 
poll for DHCP information. (Configuration mode.)
ip address if_name ip_address [netmask]
ip address outside dhcp [setroute] [retry retry_cnt]
ip address if_name pppoe [setroute]
ip address if_name ip_address netmask pppoe [setroute]
show ip
Displays IP addresses assigned to the network interfaces.
show ip address if_name dhcp
Displays detailed information about the DHCP lease.
show ip address if_name pppoe
Displays detailed information about the PPPOE connection.
global:Create or delete entries from a pool of global addresses. 
(Configuration mode.)
global [(if_name)] nat_id {global_ip [-global_ip] [netmask global_mask]}
| interface
global [(if_name)] nat_id {{global_ip} [netmask global_mask] | interface}
show global
nat:Associate a network with a pool of global IP addresses. 
(Configuration mode.)
nat [(if_name)] id address [netmask [outside] [dns] [norandomseq]
[timeout hh:mm:ss] [conn_limit [em_limit]]]
nat [(if_name)] 0 access-list acl_name
show nat
route
Enter a static or default route for the specified interface.
(Configuration mode.)
route if_name ip_address netmask gateway_ip [metric]
show route
 
conduit..
 
联合使用static和conduit命令来只允许http访问。
 
pixfirewall(config)#static (inside,outside) 
192.168.1.101 10.0.1.10 netmask 255.255.255.255
pixfirewall(config)#conduit per tcp any eq www host 172.16.1.1
conduit语法;
conduit deny|permit protocol | object-group
protocol_obj_grp_id global_ip global_mask | object-group network_obj_grp_id 
[operator port [port] | object-group service_obj_grp_id] 
foreign_ip foreign_mask | object-group network_obj_grp_id [operator 
port [port] | object-group service_obj_grp_id]
    • 评论
    • 分享微博
    • 分享邮件
    邮件订阅

    如果您非常迫切的想了解IT领域最新产品与技术信息,那么订阅至顶网技术邮件将是您的最佳途径之一。

    重磅专题
    往期文章
    最新文章